Sunday, October 20, 2013
Custom Slipcovers
Just finished this house. 12 custom slipcovers in dining room & 5 2-piece slips in the breakfast area.
Roman shade in kitchen.
Tuesday, August 13, 2013
The back pillow was made with boring brown upholstery fabric overlaid with patchwork from the other fabrics in the room. Works!
The front pillows are gold chenille from Kravet with hand applied tapes in two colors sewn over the top.
Of course all the pillows have my #4 "new gold" invisible zippers along the bottom edge.
Thursday, June 20, 2013
Wednesday, May 08, 2013
Invisible SEPARATING Zippers
These zippers are really wonderful! This size is a #6 invisible (size of coil) on a twill tape. These would be good for costuming or a jacket.
This is the back of the zipper & the side that you sew from.
To stitch, separate the 2 sides of the zipper. Start from the bottom & sew up to the top of your garment. Sew the side without the pull on first.
Then stitch the side of the zipper with the pull & box on it. Start again from the bottom. The REALLY COOL (or as my brother would say, "wicked") part of this zipper is the box moves out of the way so that you can stitch from the bottom. THEN the box snaps back over the bottom metal piece & you continue sewing up towards the top of your garment.
If your zipper is too long, then tuck the remainder or trim off to a couple of inches & tuck into the top of your garment.
Life is SHORT! Zip it UP!
Alicia